•
Junos OS System Basics Configuration Guide—Describes Juniper Networks routing
platforms, and provides information about how to configure basic system parameters,
supported protocols and software processes, authentication, and a variety of utilities
for managing your router on the network.
For information about related tasks performed by Network Operations Center (NOC)
personnel, see the following network operations guides:
•
Junos OS Baseline Operations Guide
•
Junos OS Network Interfaces Operations Guide
Audience
This guide is designed for Network Operations Center (NOC) personnel who monitor a
Juniper Networks M Series or T Series routing platform.
To use this guide, you need a broad understanding of networks in general, the Internet
in particular, networking principles, and network configuration. You must also be familiar
with one or more of the following Internet routing protocols:
•
Border Gateway Protocol (BGP)
•
Routing Information Protocol (RIP)
•
Intermediate System-to-Intermediate System (IS-IS)
•
Open Shortest Path First (OSPF)
•
Internet Control Message Protocol (ICMP) router discovery
•
Internet Group Management Protocol (IGMP)
•
Distance Vector Multicast Routing Protocol (DVMRP)
•
Protocol-Independent Multicast (PIM)
•
Multiprotocol Label Switching (MPLS)
•
Resource Reservation Protocol (RSVP)
•
Simple Network Management Protocol (SNMP)
Personnel operating the equipment must be trained and competent; must not conduct
themselves in a careless, willfully negligent, or hostile manner; and must abide by the
instructions provided by the documentation.
Supported Routing Platforms
For the features described in this manual, Junos OS currently supports the following
routing platforms:
•
M Series
•
MX Series
•
T Series
Copyright © 2012, Juniper Networks, Inc.xl
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
