Figure 252: M40e and M160 Router PCG Location
Related
Documentation
Checklist for Monitoring the PCG on page 465•
Monitor the PCG Status
To monitor the PCG status:
1.
Monitor the PCG Environmental Status on page 468
2.
Display the PCG LED States at the Command Line on page 469
3.
Check the PCG LED States on the Faceplate on page 470
Monitor the PCG Environmental Status
Purpose To monitor the PCG environmental status.
Action To monitor the PCG environment status, use the following command:
user@host> show chassis environment
Sample Output
user@host> show chassis environment
Class Item Status Measurement
Power PEM 0 OK
PEM 1 OK
Temp PCG 0 OK 41 degrees C / 105 degrees F
Copyright © 2012, Juniper Networks, Inc.468
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
