Juniper M Series User Manual

Action For all routers with a Type 2 (Teknor) Routing Engine, the serial number ID label is located
on the top right side of the Routing Engine (see Figure 79 on page 206). If there are multiple
labels on the Routing Engine, the label marked “ Teknor Silicon Serial ID” is the correct
serial number. The serial number ID label includes two serial numbers: a 16-digit number
on the top and a 10-digit number on the bottom. Give both serial numbers to JTAC.
Figure 79: Routing Engine Serial Number ID Label Location for All Routers
Related
Documentation
Routing Engine Overview on page 168•
M40 Router Routing Engine Serial Number ID Label Location
Purpose To locate the serial number ID on the M40 router Routing Engine.
Action For M40 routers, the serial number that you use depends on whether you purchased the
Routing Engine housing or just the Routing Engine. If you purchased the Routing Engine
housing, the serial number is located on the maxicab, as shown in Figure 80 on page 207.
If you purchased the Routing Engine only, remove the Routing Engine and locate the serial
number ID label. If there are multiple labels on the Routing Engine, the label marked “
Teknor Silicon Serial ID” is the correct serial number.
Copyright © 2012, Juniper Networks, Inc.206
M Series and T Series Routers Monitoring and Troubleshooting Guide

Juniper M Series Specifications

General

Brand	Juniper
Model	M Series
Category	Network Router
Language	English