Related
Documentation
Checklist for Maintaining Cables and Connectors on page 351•
Maintaining Routing Engine External Cables
The CIP contains connectors for connecting the Routing Engines to a console, a network,
an external management device, or an external alarm device.
To maintain the Console or Auxiliary Port cable, the Ethernet Management cable, or the
alarm relay cables, see the appropriate router hardware guide.
Related
Documentation
Checklist for Maintaining Cables and Connectors on page 351•
Replacing the Cable Management System
The cable management system is hot-removable and hot-insertable. You can remove
or replace the cable management system without powering down the system and
disrupting routing functions.
To replace the cable management system, see the appropriate router hardware guide.
Related
Documentation
• Checklist for Maintaining Cables and Connectors on page 351
Copyright © 2012, Juniper Networks, Inc.364
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
