EasyManua.ls Logo

Juniper M Series - Manually Switching Routing Engine Mastership

Juniper M Series
812 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Related
Documentation
Understanding Redundancy for the Routing Engine, Host Module, and Host Subsystem
on page 565
Manually Switching Routing Engine Mastership
To manually switch the Routing Engine mastership, use one of the following CLI
commands.
From the backup Routing Engine, request the backup Routing Engine to acquire
mastership:
user@host> request chassis routing-engine master acquire
user@host> request chassis routing-engine master acquire
Traffic will be interrupted while the PFE is re-initialized
Request the other routing engine become master ? [yes,no] (no)
Resolving mastership...
Complete. The other routing engine becomes the master.
user@host> request chassis routing-engine master acquire
From the master Routing Engine, request the backup Routing Engine to acquire
mastership:
user@host> request chassis routing-engine master release
user@host> request chassis routing-engine master release
Traffic will be interrupted while the PFE is re-initialized
Request the other routing engine become master ? [yes,no] (no)
Resolving mastership...
Complete. The other routing engine becomes the master.
Switch mastership from either the backup or master Routing Engine:
user@host> request chassis routing-engine master switch
If graceful switchover is not configured, the command output looks as follows:
user@host> request chassis routing-engine master switch
warning: Traffic will be interrupted while the PFE is re-initialized
Toggle mastership between routing engines ? [yes,no] (no) yes
Resolving mastership...
Complete. The local routing engine becomes the master.
user@host> request chassis routing-engine master switch
If graceful switchover is configured the command output looks as follows:
Toggle mastership between routing engines ? [yes,no] (no) yes
Resolving mastership...
Complete. The other routing engine becomes the master.
When you enter the request chassis routing-engine master acquire command on the
backup Routing Engine, you see the following:
warning: Traffic will be interrupted while the PFE is re-initialized
Attempt to become the master routing engine ? [yes,no] (no).
581Copyright © 2012, Juniper Networks, Inc.
Chapter 28: Host Redundancy Overview

Table of Contents

Related product manuals