Table 136: Logging Events (continued)
DescriptionEvent Code
The Routing Engine is configured as disabled.E_CFG_D
The maximum number of tries to acquire or release mastership was
exceeded.
E_MAXTRY
A claim mastership request was sent.E_REQ_C
A claim mastership acknowledgement was received.E_ACK_C
A claim mastership request was not acknowledged.E_NAK_C
Confirmation of mastership is requested.E_REQ_Y
Mastership is acknowledged.E_ACK_Y
Mastership is not acknowledged.E_NAK_Y
A giveup mastership request was sent by a Routing Engine.E_REQ_G
The Routing Engine acknowledges giveup of mastership.E_ACK_G
The command request chassis routing-engine master acquire was issued
from the backup Routing Engine.
E_CMD_A
Force switchover command was issued.E_CMD_F
The command request chassis routing-engine master release was issued
from the master Routing Engine.
E_CMD_R
The command request chassis routing-engine master switch was issued from
a Routing Engine.
E_CMD_S
No other Routing Engine is detected.E_NO_ORE
A request timed out.E_TMOUT
Routing Engine connection was lost.E_NO_IPC
Other Routing Engine state was changed to master.E_ORE_M
Other Routing Engine state was changed to backup.E_ORE_B
Other Routing Engine state was changed to disabled.E_ORE_D
Sample Output
user@host> show log mastership
583Copyright © 2012, Juniper Networks, Inc.
Chapter 28: Host Redundancy Overview
To Next Page
Loading...
