FPM GBUS REV 09 710-002901 RA3317 T640 FPM Board
FPM Display REV 05 710-002897 RA3249 FPM Display
CIP REV 06 710-002895 HS0716 T-series CIP
PEM 0 Rev 11 740-002595 PM18581 Power Entry Module
PEM 1 Rev 11 740-002595 PM18582 Power Entry Module
SCG 0 REV 11 710-003423 HR9871 T640 Sonet Clock Gen.
Routing Engine 0 REV 03 740-008883 211123900250 RE-4.0 (RE-1600)
Routing Engine 1 REV 03 740-008883 211123900201 RE-4.0 (RE-1600)
[...Output truncated...]
For TX Matrix Plus routers:
user@host> show chassis hardware sfc 0
sfc0-re0:
--------------------------------------------------------------------------
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN112F007AHB TXP
Midplane REV 05 710-022574 TS4027 SFC Midplane
FPM Display REV 03 710-024027 DX0282 TXP FPM Display
CIP 0 REV 04 710-023792 DW4889 TXP CIP
CIP 1 REV 04 710-023792 DW4887 TXP CIP
PEM 0 Rev 07 740-027463 UM26368 Power Entry Module
[...Output truncated...]
Meaning For all routers except the M160 router, T320 router, T640 router, and T1600 router, the
command output displays the power supply slot number, revision level, part number,
serial number, and the power supply type.
For the M160 router, T320 router, T640 router, and T1600 router, the command output
displays the power supply or Power Entry Module (PEM) slot number, revision level, part
number, serial number, and power supply type. When facing the back of the router, PEM0
is located on the right and PEM1 is located on the left.
Related
Documentation
• Checklist for Monitoring Redundant Power Supplies on page 607
Copyright © 2012, Juniper Networks, Inc.622
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
Need help?
General
