309
XL8 Control Surface
Operator Manual
Effects channel functions
Output channel GEQ 16 available in place of PEQ (above)
31 bands, 1/3 Oct, proportional Q
Lo pass frequency 2kHz to 20kHz swept
Slope 6dB/Oct or 12dB/Oct
Hi pass frequency 20Hz to 500Hz swept
Slope 6dB/Oct or 12dB/Oct
Output channel dynamic Peak, linear, RMS, vintage and shimmer modes
Threshold -50dBu to +20dBu
Attack 200µs to 20ms
Release 50ms to 3s
Ratio 25:1 to 1:1
Knee 4dB, 12dB or 40dB
Gain 0dB to +24dB
Dry mix 0% to 100%
Side chain source selectable + filter
Frequency 50Hz to 15kHz swept
Bandwidth 1/3, 1 or 2 Oct
Output clipper
Threshold 0dBu to +20dBu
Stereo effects channel 16 available configurable as
Stereo or mono in, stereo out
Modulated delay effects
Complex delay, reverbs
Advanced dynamics
RTA and advanced measurements
Effects channel stereo GEQ 16 available in place of effects (above)
31 band, 1/3 Oct., proportional Q
Lo pass frequency 2kHz to 20kHz swept
Slope 6dB/Oct or 12dB/Oct
Hi pass frequency 20Hz to 500Hz swept
Slope 6dB/Oct or 12dB/Oct