OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-65
(When the adjustment finishes with an error)
The buzzer sounds three times and the following message is displayed.
- When the drawer is open
<When an error has been detected in the adjustment result>
* An error occurs if the remaining ink sensor has not been replaced correctly.
After the error has occurred, press the OK button to return to the starting screen of the
adjustment procedure.
>>>POST-REPLAC ADJ
↕ CC A: X.XX B: Y.YY ◎
ABNORMALITY OCCURRED
CHECK NEW SENSOR â—Ž
CLOSE THE DRAWER AND
ADJUST SENSOR AGAIN â—Ž
To Next Page
Loading...
