Quantum Superloader 3 User Manual

Index
278 SuperLoader User’s Guide
R
rackmounting 16
Recovery action, error code 156
removing
SuperLoader from rack
140
requirements
location
15
SCSI bus
14
UL
15
returning units
135
S
safety
electrostatic discharge
258
grounding methods 259
SCSI bus
requirements
14
SCSI connection
location
9
making
26
specifications 250
SCSI ID
changing with On-board Remote
Management
117
On-board Remote Management
109
setting
32
security
configuring with On-board Remote
Management
118
security options
On-board Remote Management
118
setting
49
Sequential Mode 48
sequential operations
On-board Remote Management
107
setting
Control Mode
46
data compression 99
date and time
44
Ethernet
34
Ethernet IP address (dynamic) 34
Ethernet IP address (static)
35
IP gateway
38
password 52
SCSI ID
32
security options
49
SNMP server 39
subnet mask
37
time
42
time server 41
time zone
43
shock specifications
248
slots
identifying
88
SNMP server
setting
39
software, supported
12
specifications
acoustic and noise
249
environmental
247
performance
244
physical 244
power
246
SCSI
250
shock 248
vibration
248
Status
firmware version
92
status

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4