Quantum Superloader 3 User Manual

Index
SuperLoader User’s Guide 279
element
93
Ethernet information
96
SuperLoader 90
tape drive
94
status information
On-board Remote Management
103
viewing
90
status LEDs, see LEDs
Status menu, overview
74
subnet mask
setting
37
SuperLoader
configuration
30
element status 93
powering on
28
rackmounting
16
removing from rack 140
return procedure
139
setting data compression
98
status 90
tape drive status
94
tape drive version
95
SuperLoader basic information logs
boot
230
ID
230
OEM
230
shadow event
230
soft
230
update logs 230
SuperLoader error logs
146
supported software
12
system operations
On-board Remote Management
109
system updates
On-board Remote Management
127
T
tape cartridge
ejecting 80
inserting
78
maintenance
59
moving 80
moving with On-board Remote
Management
125
write-protect switch
59
tape cartridge type
data
77
tape drive
cleaning
61
cleaning methods
65
status 94
version
95
tape drive error logs
165
tape drive status
viewing
94
time
setting
42
time display
On-board Remote Management
104
time server
setting
41
time zone
On-board Remote Management
115
setting
43
troubleshooting
129
returning units
135

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4