R&S FSL CALCulate Subsystem (SPECM, K14)
1300.2519.12 6.397 E-11
C
ALCulate<1|2>:MARKer<1...4>:SPECtrogram:SARea
This command defines the search area of the specified marker.
T
he numeric suffixes <1|2> are irrelevant for this command.
Parameter
VISible | MEMory
Example
CALC:MARK2:SPEC:SAR MEM
Searches the whole data range stored in the history buffer.
Characteristics
RST value: VIS
SCPI: device–specific
Mode
SPECM
CALCulate<1|2>:MARKer<1...4>:SPECtrogram:XY:MAXimum[:PEAK]
This command positions the specified marker on the current maximum of the search area. The
search area is defined via the CALCulate<1|2>:MARKer<1...4>:SPECtrogram:SARea
command.
This command is an event and therefore has no *RST value and no query.
The numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:MARK2:SPEC:XY:MAX
Positions marker 2 on the current maximum.
Characteristics
RST value: –
SCPI: device–specific
Mode
SPECM
CALCulate<1|2>:MARKer<1...4>:SPECtrogram:XY:MINimum[:PEAK]
This command positions the specified marker on the current minimum of the search area. The
search area is defined via the CALCulate<1|2>:MARKer<1...4>:SPECtrogram:SARea
command.
This command is an event and therefore has no *RST value and no query.
The numeric suffixes <1|2> are irrelevant for this command.
Example
CALC:MARK3:SPEC:XY:MIN
Positions marker 3 on the current minimum.
To Next Page
Loading...
