Rohde & Schwarz R&S FSL3

To Next Page

To Previous Page

R&S FSL SENSe Subsystem (CATV, K20)

1300.2519.12 6.503 E-11

haracteristics

RST value: 1.5 GHz for R&S FSL3, 48.25 MHz for R&S FSL6/18 (the FREQ:RF DEF command

sets 48.25 MHz for all models)

SCPI: device–specific

Mode

CATV

[SENSe<1|2>:]FREQuency:SPAN:FULL

For details refer to "[SENSe<1|2>:]FREQuency:SPAN:FULL" on page 6.203.

[SENSe<1|2>:]FREQuency:STARt

For details refer to "[SENSe<1|2>:]FREQuency:STARt" on page 6.204.

[SENSe<1|2>:]FREQuency:STEP

For details refer to "[SENSe<1|2>:]FREQuency:CENTer:STEP" on page 6.201.

[SENSe<1|2>:]FREQuency:STOP

For details refer to "[SENSe<1|2>:]FREQuency:STOP" on page 6.204.

Rohde & Schwarz R&S FSL3 - Page 1262