R&S FSL CONFigure Subsystem (EVDO, K84)
1300.2519.12 6.647 E-11
E
xample
C
ONF:CDP:CTAB:NAME 'NEW_TAB'
Selects channel table for editing. If a channel table with this name does not exist, a new channel
table is created.
CONF:CDP:CTAB:DATA 0,6,0,0,0,0,1,0.0,10,5,3,4,0,0,1,0.0
Defines a table with the following channels: PICH 0.64 and data channel with RC4/Walsh code
3.32.
Characteristics
RST value: -
SCPI: device-specific
Mode
EVDO
CONFigure:CDPower[:BTS]:CTABle:DELete
This command deletes the selected channel table. Select the channel table you want to delete
using the CONFigure:CDPower[:BTS]:CTABle:NAME command.
This command is an event and therefore has no *RST value and no query.
Example
CONF:CDP:CTAB:NAME 'CTAB_2'
Selects channel table CTAB_2 for deleting.
CONF:CDP:CTAB:DEL
Deletes channel table CTAB_2.
Characteristics
RST value: -
SCPI: device-specific
Mode
EVDO
CONFigure:CDPower[:BTS]:CTABle:NAME
This command selects a channel table for editing or creating. To select a command for analysis,
use the CONFigure:CDPower[:BTS]:CTABle:SELect command.
Parameter
<'string'> = name of the channel table
Example
CONF:CDP:CTAB:NAME 'NEW_TAB'
Selects channel table for editing. If a channel table with this name does not exist, a new channel
table is created.
Characteristics
RST value: -
SCPI: device-specific
Mode
EVDO
To Next Page
Loading...
