Power Measurements – MEAS Key R&S FSL
1300.2519.12 4.76 E-11
Menu and softkey description
– "Softkeys of the power measurement menu" on page 4.88
To display help to a softkey, press the HELP key and then the softkey for which you want to display
help. To close the help window, press the ESC key. For further information refer to section "How to use
the Help System".
Further information
– "Power measurement in zero span" on page 4.78
– "Measurement of occupied bandwidth" on page 4.78
– "Predefined CP / ACP standards" on page 4.79
– "Settings of CP / ACP test parameters" on page 4.80
– "Ranges and range settings" on page 4.81
– "Provided XML files for the Spectrum Emission Mask measurement" on page 4.82
– "Format description of Spectrum Emission Mask XML files" on page 4.83
– "ASCII file export format (Spectrum Emission Mask)" on page 4.88
Tasks
– To measure the power in zero span
– To set the channel configuration
– To measure the occupied bandwidth
– To measure signal statistics
– To measure the carrier–to–noise ratio
To Next Page
Loading...
