EasyManua.ls Logo

Rohde & Schwarz R&S FSL3 - Page 291

Rohde & Schwarz R&S FSL3
1734 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power Measurements – MEAS Key R&S FSL
1300.2519.12 4.106 E-11
Range Start/Range Stop (Sweep List dialog box)
Sets the start frequency/stop frequency of the selected range. Follow the rules described in
"Ranges and range settings" on page 4.81.
In order to change the start/stop frequency of the first/last range, select the appropriate span
with the SPAN key. If you set a span that is smaller than the overall span of the ranges, the
measurement includes only the ranges that lie within the defined span and have a minimum
span of 20 Hz. The first and last range are adapted to the given span as long as the minimum
span of 20 Hz is not violated.
Spectrum Emission Mask measurement:
Frequency values for each range have to be defined relative to the center frequency. The
reference range has to be centered on the center frequency. The minimum span of the
reference range is given by the current TX Bandwidth. For details refer to the Edit Reference
Range softkey description.
Remote: ESP:RANG1:STAR 100000000 (Spectrum Emission Mask)
Remote: ESP:RANG3:STOP 10000000 (Spectrum Emission Mask)
Remote: LIST:RANG1:STAR 100000000 (Spurious Emissions)
Remote: LIST:RANG3:STOP 10000000 (Spurious Emissions)
Filter Type (Sweep List dialog box)
Sets the filter type for this range. For details on filters see also "To choose the appropriate filter
type" on page 4.19.
Remote: ESP:RANG1:FILT:TYPE RRC (Spectrum Emission Mask)
Remote: LIST:RANG1:FILT:TYPE RRC (Spurious Emissions)
RBW (Sweep List dialog box)
Sets the RBW value for this range.
Remote: ESP:RANG2:BAND:RES 5000 (Spectrum Emission Mask)
Remote: LIST:RANG2:BAND:RES 5000 (Spurious Emissions)
VBW (Sweep List dialog box)
Sets the VBW value for this range.
Remote: ESP:RANG1:BAND:VID 5000000 (Spectrum Emission Mask)
Remote: LIST:RANG1:BAND:VID 5000000 (Spurious Emissions)
Sweep Time Mode (Sweep List dialog box)
Activates or deactivates the auto mode for the sweep time.
Remote: ESP:RANG3:SWE:TIME:AUTO OFF (Spectrum Emission Mask)
Remote: LIST:RANG3:SWE:TIME:AUTO OFF (Spurious Emissions)

Table of Contents

Related product manuals