R&S FSL Power Measurements – MEAS Key
1300.2519.12 4.113 E-11
ASCII File Export
An example of an output file is given in "ASCII file export format (Spectrum Emission Mask)" on
page 4.88. For further details refer also to the ASCII File Export softkey in the trace menu of the
base unit.
This softkey is available from firmware version 1.80.
Remote: MMEM:STOR:LIST 'test'
Decim Sep
For details refer to the Decim Sep softkey in the trace menu of the base unit.
This softkey is available from firmware version 1.80.
Edit Power Classes
Opens a dialog box to modify the power class settings.
The dialog box contains the following elements:
– Used Power Classes
Choose the power classes to be used from this dropdown menu. It is only possible to select either
one of the defined power classes or all of the defined power classes together.
Only power classes for which limits are defined are available for selection.
– PMin / PMax
Defines the level limits for each power class. The range always starts at -200 dBm (-INF) and
always stops at 200 dBm (+INF). These fields cannot be modified. If more than one Power Class is
defined, the value of PMin must equal the value of PMax of the last Power Class and vice versa.
To Next Page
Loading...
