R&S FSL Analog Demodulation (Option K7)
1300.2519.12 4.153 E-11
Softkeys of the amplitude menu (Analog Demodulation mode)
The following table shows all softkeys available in the amplitude menu in Analog Demodulation mode
(AMPT key). It is possible that your instrument configuration does not provide all softkeys. If a softkey is
only available with a special option, model or (measurement) mode, this information is delivered in the
corresponding softkey description.
Menu / Command Command
Ref Level
Range Log/Range Linear
AF Range Dev per Division/dB per Division
Reference Position
Reference Value
Deviation Lin/Log
Preamp On/Off
RF Atten Manual
RF Atten Auto
More
Ref Level Offset
Ref Level Position
Grid Abs / Rel
Unit
Input 50 L / 75 L
Ref Level
For details refer to the Ref Level softkey in the amplitude menu of the base unit.
Range Log (RF result display)
This softkey is only available for the RF result display. For the RF result display, the AF Range
softkey is used.
For details refer to the Range Log softkey in the amplitude menu of the base unit.
Range Linear (RF result display)
This softkey is only available for the RF result display. For the RF result display, the AF Range
softkey is used.
For details refer to the Range Linear softkey in the amplitude menu of the base unit.
AF Range (AF result display)
For details refer to the AF Range softkey in the analog demodulation menu.
To Next Page
Loading...
