R&S FSL CDMA2000 BTS Analyzer (Option K82)
1300.2519.12 4.345 E-11
Next Peak
For details refer to the Next Peak softkey in the MKR-> menu of the base unit.
Next Peak Mode < abs>
For details refer to the Next Peak Mode < abs > softkey in the MKR-> menu of the base unit.
F-PICH
Sets the marker to the F-PICH channel. The softkey is only available if the x-axis of the active
screen is a code axis.
Remote: CALC:MARK:FUNC:PICH
F-TDPICH
Sets the marker to the F-TDPICH channel. The softkey is only available if the x-axis of the active
screen is a code axis.
Remote: CALC:MARK:FUNC:TDP
Min
For details refer to the Min softkey in the MKR-> menu of the base unit.
Next Min
For details refer to the Next Min softkey in the MKR-> menu of the base unit.
Next Min Mode < abs>
For details refer to the Next Min Mode < abs > softkey in the MKR-> menu of the base unit.
Softkeys of the measurement menu (CDMA2000 BTS Analyzer mode)
The following table shows all softkeys available in the measurement menu in CDMA2000 BTS
Analyzer mode. It is possible that your instrument configuration does not provide all softkeys. If a
softkey is only available with a special option, model or (measurement) mode, this information is
delivered in the corresponding softkey description.
Menu / Command Submenu / Command
Code Domain Analyzer
Power
Adjacent Channel Power ACP Config
Sweep Time
Fast ACP On/Off
ACP Abs/Rel
To Next Page
Loading...
