R&S FSL 1xEV-DO BTS Analyzer (Option K84)
1300.2519.12 4.377 E-11
If the focus is on Slot selection, select a slot. Enter the number as a decimal. The range of the
values is from 0 to (Capture Length -1). Refer to Capture Length for further details.
The following measurements take results for a Slot into account: Code Domain Power, Code
Domain Error, Channel Table, Power vs Chip, Power vs Symbol, Composite Constellation,
G
eneral Results, Channel Results, Bitstream, Symbol Constellation, EVM vs Symbol. In the
Composite EVM and Peak Code Domain Error the selected slot is highlighted in red.
Remote: CDP:CODE 0...(CAPTURE LENGTH -1)
Remote: CDP:CODE 0...31 | 63
Channel Type
Select one of the following channel types for the measurement:
Also opens a softkey submenu conatining the following items:
Pilot
MAC
Preamble
Data
For further details on the characteristics of the channel types refer to Channel Type
Characteristics on page 4.363.
Remote: CDP:CTYP PIL
Pilot
Selects the Pilot channel type.
Remote: CDP:CTYP PIL
MAC
Selects the MAC channel type.
Remote: CDP:CTYP MAC
Preamble
Selects the Preamble channel type.
Remote: CDP:CTYP PRE
Data
Selects the Data channel type.
Remote: CDP:CTYP DATA
To Next Page
Loading...
