R&S FSL 1xEV-DO BTS Analyzer (Option K84)
1300.2519.12 4.401 E-11
Code Domain Analyzer
AActivates the Code Domain Analyzer and opens the Code Domain Analyzer menu. Select the
desired result display via this menu. For details refer to Softkeys of the Code Domain Analyzer
Menu (1xEV-DO BTS Analyzer mode).
For details on the measurements in the code domain, initial configuration and screen layout refer
to the description of the Code Domain Analysis.
Remote: CONF:CDP:MEAS CDP
Power
Activates the Signal Channel Power measurement, in which the power of a single channel is
determined.
For details on screen layout and default values see the description of the Signal Channel Power.
Remote: CONF:CDP:MEAS POW
Remote: CALC:MARK:FUNC:POW:RES? CPOW (result query)
Adjacent Channel Power
Activates the Adjacent Channel Power measurement.
In this measurement the power of the carrier and its adjacent and alternate channels is determined.
For details on screen layout and default values see the description of the Adjacent Channel Power.
Also opens the Adjacent Channel Power submenu containing the following softkeys:
Command
Bandclass
ACP Config
Sweep Time
Fast ACP On/Off
ACP Abs/Rel
Adjust Ref Level
Remote: CONF:CDP:MEAS ACLR
Remote: CALC:MARK:FUNC:POW:RES? ACP (result query)
Bandclass
softkey:Band Class (K84)"Opens a dialog box to select the bandclass. The following
bandclasses are available:
Band Class 0 800 MHz Cellular Band
Band Class 1 1.9 GHz PCS Band
Band Class 2 TACS Band
Band Class 3 JTACS Band
Band Class 4 Korean PCS Band
Band Class 5 450 MHz NMT Band
Band Class 6 2 GHz IMT-2000 Band
To Next Page
Loading...
