1xEV-DO BTS Analyzer (Option K84) R&S FSL
1300.2519.12 4.404 E-11
Bandclass
Opens a dialog box, to select a specific bandclass.
A
list of the supported bandclasses can be found in the description of the Bandclass softkey in
the ACP measurement menu.
The settings for each bandclass are provided in *.xml files that are located in the directory
C:\R_S\INSTR\sem_std\EVDO\dl. The files themselves are named C2K_DL_BC01.XML
(bandclass 1) to C2K_DL_BC17.XML (bandclass 17). By selecting one of the bandclasses from
the dialog box, the correct file will be loaded automatically. The file can also be loaded manually
(see XML Import softkey).
Remote: CONF:CDP:BCL <value>
XML Import
Opens the XML Import dialog box, in which the *.xml file to be imported can be selected. If a file
is imported, the SEM settings specified in the file will be used. All previous SEM settings will be
lost.
Remote: ESP:PRES "<file name>"
XML Export
Opens the XML Export dialog box, in which the currently used SEM settings and parameters
can be saved and exported into an *.xml file. Enter the name of the file in the file name field.
It is also possible to save the settings under one of the default bandclass file names (see
Bandclass softkey). When overwriting one of the default files, the customized settings will be
linked to the corresponding bandclass while the default settings are lost.
To restore the default bandclass settings press the Restore Default Files softkey.
Remote: ESP:STOR "<file name>"
Meas Start/Stop
For details on the Meas Start/Stop softkey refer to the Meas Start/Stop softkey in the Spectrum
Emission Mask submenu of the base unit.
Restore Default Files
"softkey:Restore FSL K84 Files (K84)"Restores all default files of the K84 option into the
C:\R_S\INSTR\sem_std\1EVDO\dl directory. If changes have been applied to the files, these will
be lost.
Remote: ESP:PRES:REST
To Next Page
Loading...
