WiMAX, WiBro Measurements (Options K92/K93) R&S FSL
1300.2519.12 4.488 E-11
Marker Off
Switches off all makers in the active result display.
Remote: CALC2:MARK:AOFF
Softkeys of the marker–> menu (WiMAX mode)
The following table shows all softkeys available in the marker–> menu in WiMAX mode (MKR–> key). It
is possible that your instrument configuration does not provide all softkeys. If a softkey is only available
with a special option, model or (measurement) mode, this information is delivered in the corresponding
softkey description.
Command
MKR –> Trace
MKR –> Trace
Opens an edit dialog box to enter the number of the trace, on which the marker is to be placed.
This softkey is available for all result displays with more than one trace.
Remote: CALC2:MARK:TRAC 2
Softkeys of the lines menu (WiMAX mode)
The following table shows all softkeys available in the lines menu in WiMAX mode (LINES key). It is
possible that your instrument configuration does not provide all softkeys. If a softkey is only available
with a special option, model or (measurement) mode, this information is delivered in the corresponding
softkey description.
This menu is only available if the results are displayed in form of a list (for details see Result summary
list and Display Graph/List softkey).
Command
Default Current
Default All
Default Current
Resets all limits for the current modulation scheme to the values specified in the selected
standard.
Remote: see CALCulate:LIMit Subsystem
Default All
Resets all limits for all modulation schemes to the values specified in the selected standard.
Remote: see CALCulate:LIMit Subsystem
To Next Page
Loading...
