Rohde & Schwarz R&S FSL3 - Page 805

CALCulate Subsystem R&S FSL
1300.2519.12 6.46 E-11
Example
CALC:LIM:ESP:PCL:COUN ABS
Characteristics:
*RST value: –
SCPI: conform
Mode
A, CDMA
CALCulate<1|2>:LIMit<1…8>:ESPectrum:LIMits
This command sets the limits for all power classes you want to use. The limit defined by the
string always starts at -200 dBm and always ends at 200 dBm. Between these up to three limits
can be defined. See also CALCulate<1|2>:LIMit<1…8>:ESPectrum:PCLass<1…4>:MINimum
and CALCulate<1|2>:LIMit<1…8>:ESPectrum:PCLass<1…4>:MAXimum
The numeric suffixes <1|2> and <1…8> are irrelevant for this command.
Parameter
<numeric value>
Example
-200, -90, 0, 90, 200
Sets the minimum power value of the first power class to -200 dBm and the maximum power
value of the first power class to -90 dBm. The second power class begins at -90 dBm and ends
at 0 dBm etc.
Characteristics
*RST value: -
SCPI: conform
Mode
A, CDMA, EVDO