R&S FSL HCOPy Subsystem
1300.2519.12 6.141 E-11
H
COPy:CMAP<1...26>:DEFault
This command sets the colors for a printout or hardcopy. The numeric suffix in CMAP is not
significant.
This command is an event and therefore has no query and no *RST value.
This command is available from firmware version 1.10.
Parameter
1 current screen colors with the background in white and the grid in black.
2 optimized color set
3 user defined color set
4 current screen colors without any changes (setting for hardcopies)
Example
HCOP:CMAP:DEF2
Selects the optimized color set for the color settings of a printout or a hardcopy.
Characteristics
*RST value: -
SCPI: conform
Mode
all
HCOPy:CMAP<1...26>:HSL
This command defines the color table in user defined colors.
To each numeric suffix of CMAP is assigned one or several picture elements which can be
modified by varying the corresponding color setting. For details on the CMAP assignment refer
to "CMAP suffix assignment" on page 6.127.
The values set are not changed by *RST.
This command is available from firmware version 1.10.
Parameter
hue = tint
sat = saturation
lum = brightness
The value range is 0 to 1 for all parameters.
Example
HCOP:CMAP2:HSL 0.3,0.8,1.0
Changes the grid color
Characteristics
*RST value: -
SCPI: conform
Mode
all
To Next Page
Loading...
