2. Click and hold on the item whose priority you wish to reorder.
3. Drag the item up or down to the desired place.
4.
Click Submit.
Resetting Reference Priorities to Factory Defaults
To reset all references in the Reference Priority table to their factory default pri-
orities:
1.
Navigate to the Configure Reference Priorities screen via MANAGEMENT
> OTHER: Reference Priority menu.
2.
In the Actions panel, click the Restore Factory Defaults button.
3.3.1.2 The "Local System" Reference
The Local System reference is a "Self" reference, i.e. SecureSync uses itself as an
input reference for Time, or as a 1PPS reference. The Local System is a unique
input reference in that it can be used as either the Time reference, or the 1PPS ref-
erence, but never both.
208
CHAPTER 3 • SecureSync 2400 User Manual Rev. 5.2
3.3 Managing References
To Next Page
