Primary DNS
Secondary DNS
IPv6 Status tab
Enable DHCP [checkbox]
Address
Subnet prefix
Gateway
Ignore Auto DNS? [checkbox]
Ignore Auto Routes? [checkbox]
Primary DNS
Secondary DNS
NTP
To configure NTP on this set of option cards, navigate to MANAGEMENT > NTP
Setup.
In the Actions panel, select the Configure xxxx 1GBE (Slot x) button.
In the xxxx 1GBE (Slot x) NTP Status window are four tabs:
In the General Status tab:
Enable or disable NTP
Enter Symmetric Keys
Enter Access Restrictions
In the Ref-Clocks tab:
The phc0 of your host unit will be listed (the time reference provided to the
card)
In the Servers tab:
View a list of configured servers and click Edit Servers to add or edit them.
In the NTP Servers window, click on the plus sign to add additional servers
by entering information into the following fields:
Host
Min Poll Interval
498 SecureSync 2400 User Manual
APPENDIX
To Next Page
Loading...
