Safran SecureSync 2400 - Page 6

1.6.10 Cables 31
1.6.11 Protocols Supported 32
1.6.12 Mechanical and Environmental Specifications 32
1.7 The SecureSync Web UI 34
1.7.1 The Web UI HOME Screen 34
1.7.2 The INTERFACES Menu 35
1.7.3 The Configuration MANAGEMENT Menu 36
1.7.4 The TOOLS Menu 37
1.8 Regulatory Compliance 37
CHAPTER 2
SETUP 41
2.1 Installation Overview 42
2.1.1 Main Installation Steps 42
2.2 Unpacking and Inventory 43
2.3 Required Tools and Parts 44
2.3.1 Required GNSS Antenna Components 44
2.4 SAFETY 45
2.5 Mounting the Unit 48
2.5.1 Rack Mounting (Ears) 49
2.6 Connecting the GNSS Input 50
2.7 Connecting Network Cables 51
2.8 Connecting Inputs and Outputs 52
2.9 Connecting Supply Power 52
2.9.1 Using AC Input Power 53
2.9.2 Using DC Input Power 53
2.9.3 Hot Swap Power Supply 56
2.9.3.1 Hot Swap Installation 57
2.9.3.2 Hot Swap Monitoring 57
2.10 Powering Up the Unit 61
2.11 Zero Configuration Setup 63
2.11.1 Using Zeroconf 64
2.12 Setting up an IP Address 64
2.12.1 Dynamic vs. Static IP Address 65
IV
SecureSync 2400 User Manual • TABLE OF CONTENTS