2.12.2 Assigning a Static IP Address 66
2.12.2.1 Setting Up an IP Address via the Front Panel 66
2.12.2.2 Setting Up a Static IP Address via a DHCP Network 69
2.12.2.3 Setting Up an IP Address via the Serial Port 69
2.12.2.4 Setting up a Static IP Address via Ethernet Cable 70
2.12.3 Subnet Mask Values 71
2.13 Accessing the WebUI 71
2.14 Configure Network Settings 73
2.14.1 General Network Settings 75
2.14.2 Network Ports 76
2.14.3 Network Services 77
2.14.4 Static Routes 78
2.14.5 Access Rules 80
2.14.6 HTTPS 81
2.14.6.1 Accessing the HTTPS Setup Window 81
2.14.6.2 About HTTPS 83
2.14.6.3 HSTS Setup 83
2.14.6.4 Supported Certificate Formats 84
2.14.6.5 Creating an HTTPS Certificate Request 84
2.14.6.6 Adding HTTPS Subject Alternative Names 87
2.14.6.7 Requesting an HTTPS Certificate 89
2.14.6.8 Uploading an X.509 PEM Certificate Text 90
2.14.6.9 Uploading an HTTPS Certificate File 91
2.14.7 SSH 92
2.14.8 SNMP 100
2.14.8.1 SNMP V1/V2c 105
2.14.8.2 SNMP V3 106
2.14.8.3 SNMP Traps 108
2.14.9 VLAN Support 111
2.14.10 System Time Message 111
2.14.10.1 System Time Message Format 112
2.15 Configure NTP 113
2.15.1 Checklist NTP Configuration 114
2.15.2 The NTP Setup Screen 114
2.15.3 Dis-/Enabling NTP 117
2.15.4 Viewing NTP Clients 118
2.15.5 Restoring the Default NTP Configuration 118
SecureSync 2400 User Manual • TABLE OF CONTENTS
V
To Next Page
Loading...
