Introduction
1
1.1 About SINAMICS
Description
With the SINAMICS converter series you can solve drive tasks in the low, medium and DC voltage
range. All Siemens drive components, such as converters, motors, and controls, are matched to
each other and can be integrated into your existing automation systems.
You can nd more information via the SINAMICS YouTube playlist (
https://www.youtube.com/
playlist?list=PLw7lLwXw4H53rtHeTeifKtVMr2aXTYt0X).
1.2 About this manual
1.2.1 Content
Overview
The Equipment Manual describes hardware components, and provides the information,
procedures and operator actions required for the particular usage phase.
The Equipment Manual provides information so that the target group is capable of installing,
setting up, testing, operating and troubleshooting the devices safely and correctly.
1.2.2 Sales law
To illustrate possible application areas for our products, typical use cases are listed in this product
documentation and in the online help. These are purely exemplary and do not constitute a
statement on the suitability of the respective product for applications in specic individual cases.
Unless explicitly contractually agreed, Siemens assumes no liability for such suitability.
Suitability for a particular application in specic individual cases must be assessed by the user,
taking into account all technical, legal, and other requirements on a case-by-case basis. Always
observe the descriptions of the technical properties and the relevant constraints of the
respective product contained in the product documentation.
Booksize power units
Equipment Manual, 09/2023, A5E53307519B AA 11
To Next Page
Loading...
