Siemens SINAMICS S220

In mixed operation, the article numbers of SINAMICS S220 booksize components are
displayed with the compatible article numbers of SINAMICS S120 booksize components in
the engineering tools (e.g. Startdrive). If there is no compatible SINAMICS S120 booksize
component for a component, then the article number of the SINAMICS S220 booksize
component is displayed.
Table 3-1 Examples for displaying article numbers in mixed operation for the engineering tools (e.g. Startdrive)
Compatible SINAMICS
S120 booksize compo‐
nent
Displays the article number Article number on the com‐
ponent nameplate
Article No. in the Control
Unit
Available Article No. of the SINAMICS S120
booksize component
6SL5130-6UE21-6AC0 6SL3130-6TE21-6AA8
Not available Article No. of the SINAMICS S220
booksize component
6SL5130-6UE21-6AD0 6SL5130-6UE21-6AD0
More information
Additional information on compatibility with SINAMICS S120 booksize components as well as
mixed operation with SINAMICS S120 chassis components is provided in the Internet:
• SINAMICS S220/S120 booksize modules, compatibility list (https://
support.industry.siemens.com/cs/ww/en/view/109806050)
• Mixed operation of booksize and chassis modules (https://
support.industry.siemens.com/cs/ww/en/view/109757730)
3.2 Guideline, standards, certi󹪝cates
3.2.1 Applicable standards
EC Declaration of Conformity
European Machinery Directive
The converters ful󹪝ll the requirements stipulated in the Machinery Directive 2006/42/EC, if
they are covered by the application area of this directive.
However, the use of the converters in a typical machine application has been fully assessed
for compliance with the main regulations in this directive concerning health and safety.
European Low-Voltage Directive
System overview
3.2Guideline, standards, certi󹪝cates
Booksize power units
Equipment Manual, 09/2023, A5E53307519B AA 33