Siemens SINAMICS S220

The converter ful󹪝lls the requirements stipulated in the Low-Voltage Directive 2014/35/EU,
insofar as they are covered by the application area of this directive.
Directive 2011/65/EU
The converters ful󹪝ll the requirements stipulated in Directive 2011/65/EU relating to the
restriction of the use of certain hazardous substances in electrical and electronic devices
(RoHS).
European EMC Directive
The compliance of the converter with the regulations of the Directive 2014/30/EU has been
demonstrated by full compliance with the IEC/EN 61800-3.
UKCADeclaration of Conformity
The converter complies with the requirements for the British market (England, Wales and
Scotland).
Underwriters Laboratories (North American market)
Converters provided with the test symbols displayed ful󹪝l the requirements stipulated for the
North American market as a component of drive applications.
Australia and New Zealand (RCM formerly C-Tick)
Converters with the symbols shown comply with EMC requirements for Australia and New
Zealand.
ISO 9001 and ISO 14001 quality systems
Siemens AG employs a quality management system that complies with ISO 9001 and ISO 14001.
System overview
3.2Guideline, standards, certi󹪝cates
Booksize power units
34 Equipment Manual, 09/2023, A5E53307519B AA