Siemens SINAMICS S220

NOTICE
Damage to components when using incorrect motor reactors
Using motor reactors that have not been approved by Siemens for SINAMICS can result in
component damage.
• Only use motor reactors that Siemens has approved for operation with SINAMICS.
Motor reactors
Article number
6SE7021-0ES87-1FE0 6SL3000-2BE21-0AA0 6SE7022-6ES87-1FE0
Suitable for Motor Module
Article No. 6SL5120-
.UE13-0A..
.UE15-0A..
.UE21-0A.. .UE21-8A..
.UE21-8S..
Motor reactors
Article number
6SE7024-7ES87-1FE0 6SE7027-2ES87-1FE0 6SL3000-2BE26-0AA0
Suitable for Motor Module
Article No. 6SL5120-
1UE22-4A..
1UE23-0A..
1UE23-0S..
1UE24-5A.. 1UE26-0A..
Motor reactors
Article number
6SE7031-5ES87-1FE0 6SE7031-8ES87-1FE0 6SE7032-6ES87-1FE0
Suitable for Motor Module
Article No. 6SL5120-
1UE28-5A.. 1UE31-3A.. 1UE32-0A..
10.2.2 Safety information
WARNING
Electric shock in the event of missing touch protection
Touching live components can result in death or severe injury.
• For motor reactors with degree of protection IP00, use touch protection according to IPXXA
or corresponding to local installation regulations.
Motor-side power components
10.2Motor reactors
Booksize power units
256 Equipment Manual, 09/2023, A5E53307519B AA