Siemens SINUMERIK 840D

Introduction
1.2 Operator panel fronts
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
25
Key Function
<INSERT>
 Opens an editing window in the insert mode. Press the key
again, exits the window and the entries are undone.
 Opens a selection box and shows the selection options.
<INPUT>
 Completes input of a value in the entry field.
 Opens a director or a program.
<ALARM> - only OP 010 and OP 010C
Select the "Diagnosis" operating area.
<PROGRAM> - only OP 010 and OP 010C
Calls the "Program Manager" operating area.
<OFFSET> - only OP 010 and OP 010C
Calls the "Parameter" operating area.
<PROGRAM MANAGER> - only OP 010 and OP 010C
Calls the "Program Manager" operating area.
Menu forward key
Advances in the extended horizontal softkey bar.
Menu back key
Returns to the higher-level menu.
<MACHINE>
Calls the "Machine" operating area.
<MENU SELECT>
Calls the main menu to select the operating area.