Vector VEC-VA Series

VA Motion Controller Programming Manual
99
Step 3: Settings ;
Step 4: communication type: select "
TCP / IP
" ;
Step５: IP address " 192.168.1.123-p41100 " (The IP address on the controller is not allowed
to be fixed ) ;
Step 6: Version establishment: Select
eCLR
(
Core.3.0.8
) ;
Step7:
Click "OK" .
PC
computer settings as shown below
Settings on your computer:
Step1: Click
->
Start
->
ControlPanel
->
Network and
Internet ->
Network
- >
Connection
"Local Area Connection"
- >
Properties
->
Double-click "
Internet
Protocol
Version
4
(
TCP/IPV4
)";
Step 2: Select "Use the following IP address ( S )"， Enter IP be: 192.168.1.122
Subnet Mask:
255.255.255.0
;