Barco DP2K Series - Steps to be Taken for Metadata Control; Access to the Metadata Control

4. Diagnostics
Content of the metadata info
Metadata Control from a server:
• Provides projector setup instructions without operator action
• Contains instructions provided by content creator (PostProduction)
• Information sent from server to projector at start of the movie
• Setup parameters include:
- Target color space (7-point) (TCGD)
- Color space conversion parameters (CSC)
- Gamma (LUT-DG)
- Incoming image size (SOURCE)
- Projector Lookup tables (LUT-AL, LUT-CLUT)
4.4.5.2 Steps to be taken for metadata control
Overview
1. With Metadata enable not checked, fi ll out first the metadata server address together with the metadata
file.
2.Setupthe“timetolive”.
3. Activate the metadata
4.4.5.3 Access to the metadata control
How to get access
1. Go to Diagnostics and tip on CineCanvas.
2. Then tip on Metadata Control (1). (image 4-35)
The Metadata control window opens (2).
Image 4-35
Startup metadata control
114 R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012