6. Maintenance
6. MAINTENANCE
Overview
• About smart maintenance
• Maintenance info for specific maintenance type
• Software upgrade, launch DC update companion
• Software upgrade, projector or touch panel package
• ICP software upgrade
• Link decryptor software update
• Update logging
6.1 About smart maintenance
Overview
Error messages with identifier 620x, displayed during start up or when consulting the Diagnostic window
are maintenance notifications. That means that an maintenance action on the projector is necessary as
soon as possible.
When a maintenance action is pending, the tail light of the projector will turn blue
.
Besides, preventive maintenance actions can also be performed on the projector even if the remaining
time is still positive.
Go to Maintenance → Smart maintenance.
Image 6-1
Maintenance list
The Smart maintenance window displays the four types of maintenance foreseen for a Cinema projector
(1). For each type, the maintenance interval period (2) is indicated.
The remaining period (3) indicates the time left before a new maintenance has to be done. When this
value is negative, that means that the maintenance action is ’overdue’ and should be done immediately.
The info button (4) displays an overview of the maintenance actions for that typical type of maintenance.
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
199
To Next Page
Loading...
Need help?
General
