4. Diagnostics
Image 4-2
Diagnostics companion
This diagnostic companion window gives for a given situation a possible solution. For a certain error
number, multiple situations and solutions are possible and are helpful to solve the error.
4.1.2 Active files
What is possible ?
All current active files in the projector can be listed in a separate window.
How to display
1. While in Diagnostics,tiponActual.
The Actual overview pane is displayed.
2. Tip Active files... . (image 4-3)
A separate window opens with all active files.
Information about the response in the file name column:
- <DEFAULT> : Default data was used (typically when a PCF is loaded which does not specify some
settings)
- <CALCULATED> : Typical return for CSC-P7 data, since this data is calculated each time new MCGD
or TCGD data is entered
- <DIRECT> : Used when data are directly changed by the user, not with the means of a file (typically
values in the PCF editor)
- <COLORS-MIXED> : Used for LUT-DG when actively updated with a file for only one color
- <TESTPATTERN> : Used when values have been modified for showing a test pattern (original values
are restored after clearing the test pattern)
86
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
To Next Page
Loading...
Need help?
General
