5. Installation
Service mode
When service action should be done on the projector while the projector is running, check the radio button
before Activated. SNMP alarms generated during the servicing time will be blocked so that no unneces-
sary SMS or E-mails are sent to the control room.
Once the servicing action is finished, check disabled again. SNMP alarms can be sent out again.
If the services is not disabled again within 6 hours, the SNMP agent will automatically disable this function
so that SNMP alerts can be sent out.
System location
Toaddthelocationofthesystem,tipintheinputfield next to System location and enter a location with
the keyboard.
5.9.11 Security
Overview
• Overview list of keys as root user
• Overview list of keys as default user
• Add extra key to the list
• Change PIN code of an existing key
5.9.11.1 Overview list of keys as root user
How to get an overview list
1. While in the Advanced tab page, tip on Manage Security Keys (1). (image 5-68)
The security window opens (2).
2. Tip on the show key list button (3).
An overview of the available keys is displayed (4).
Image 5-68
Key list as root user.
190 R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
To Next Page
Loading...
Need help?
General
