7. Touch panel
<other.changeInputPacking ReadWrite="50"/>
</UserAccess >
This file gives the Default user additional access to Screen masking and Input/Packing selection. All other
settings remain the same.
7.3.3 Load custom settings
What can be done ?
The externally created user access definition file can be loaded as new settings.
How to load
1. While Shift key is pressed, double tip in the gray area next to User (1). (image 7-9)
The User Access settings window opens.
2. Tip on Upload new setting file (2).
The Open user access file window opens (3).
3. Tip on the storage location at the left side (4a)
- Touch panel
- USB storage
Or,
tip on the drop down box and select the storage location (4b).
4. Select the desired file (5.
5. Tip on OK (6).
A restart message opens. Before the new user settings are applied, the application should be restarted.
6. Tip Yes to restart the application (7).
228
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
To Next Page
Loading...
Need help?
General
