Barco DP2K Series User Manual

7. Touch panel
Image 7-26
Sound setup
7.4.6 Screen saver enable - disable
About the screen saver
The touch panel screen saver can be enabled or disable. Use this screen saver to protect the touch panel
against burn ins when it is not used for along time. The time-out to activate the screen saver can be setup.
The time-out is the time between the last touch and the moment the screen saver is activated.
How to activate the screen saver and setup the time out
1. While in the Touch panel menu, tip on Display.
2. Go to Screen saver and tip Change. (image 7-27)
The screen saver activation window opens.
3. Check the check next to Disabled.
Checked Screen saver is enabled
Not
checked
Screen saver is disabled
4. To set the time out, tip on the up down control next to Time-out
Or,
tipintheinputfield, select the current value and enter a value with the keyboard.
The time-out value can be set between 0 and 60 minutes.
244
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012

Barco DP2K Series Specifications

General

Brand	Barco
Model	DP2K Series
Category	Touch Panel
Language	English