5. Installation
Projector returns to its normal operating conditions.
Image 5-63
Refill mode
5.9.9 Functionality keys
5.9.9.1 Entering a single key
SNMP
Simple Network Management Protocol is the protocol governing network management and the
monitoring of network devices and their functions.
What can be done?
Depending whether the option has been ordered, it is necessary to enter the key that has been delivered
with the projector. When the key is correctly entered, the SNMP option will be enabled.
From the moment the key is entered the SNMP mechanism is enabled and an agent will send alarms to
aspecific person when something goes wrong with the projector.
How to enter the key
1. While in the Advanced tab page, tip on Edit functionality keys (1). (image 5-64)
The functionality keys window opens
with the current active keys (2).
2. Tip in the corresponding key input field and select the current setting (3).
3. Enter the key exactly as indicated on your registration card (use the simulated keyboard).
Note: Input is not case sensitive.
4. Tip on Save (4).
A check window appears to confirm your key entry (5).
5. When OK, tip Yes (6).
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
185
To Next Page
Loading...
Need help?
General
