Barco DP2K Series - Automation; GPO Control

8. Macro editor
8.4.5 Automation
8.4.5.1 GPO control
What can be done ?
A function can be associated to a general purpose output.
How to add a function
1. Tip on GPO Control. (image 8-37)
The right pane shows a GPO selection box and function box.
2. tip on the drop down box next to Output.
3. Select a GPO out of the list.
4. Tip on the drop down box next to Function to associate a function to the selected Output.
Possible functions:
-Setlow
- Set high
- Toggle
- Continuos toggle
Image 8-37
GPO control command
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012 269