8. Macro editor
8.4.1.8 Activate lens
What can be done ?
The active lens file (contains zoom, shift and focus information) can be installed in the projector via the
Activate lens file command.
How to select a file
1. Tip on Activate Lens file. (image 8-21)
The right pane shows the current selected file.
2. Tip on Select file.
A files overview window is displayed. (image 8-22)
3. Select the desired file out of the list and tip OK.
Or,
double tip on the desired file.
The selected file name appears next to Filename.
Image 8-21
Activate lens file
Image 8-22
Select a lens file
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012 261
To Next Page
Loading...
