8. Macro editor
Image 8-29
Disable test pattern command
Image 8-30
Disable test pattern command
8.4.4 Output
8.4.4.1 Lamp control
What can be done ?
The lamp can be switched on or off via this macro command.
Howtoswitchthelamp
1. Tip on Lamp control. (image 8-31)
The right pane shows the selection buttons.
2. Select the radio button of your choice.
lamp on lamp will be switched on
lampoff lampwillbeswitchedoff
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
265
To Next Page
Loading...
