5. Installation
5.9.4.3 Create a Basic clone file
What can be done ?
All presets (macros) that are linked to a button and the files these presets are pointing to, together with its
position on the keypad and/or touch panel are copied in a zip file. By default, projector specific files are
not included in the zip file. These files can be included if desired so that a restore on the same projector
is possible.
How to make a basic clone
1. Check the radio button next to Create a clone file from the projector and tip on Next>. (image 5-42)
2. Check the radio button next to Preset clone and tip on Next>.
The software gathers all presets, the pointed files and the locations and display it for confirmation.
By default, setup specific files will not be included in the clone file.
3. Do yo want to include setup specific files?
If yes, Check the check box in front of Clone setup specific settings and tip then on Next>.
A message is displayed. Sharing MCGD and SCREEN data is not recommended. Use it only for
backup purposes. (image 5-43, image 5-44)
If no, click immediately on Next> without checking the check box. (image 5-45)
In both cases, data will be retrieved and an overview is given from what is included.
The state:
- included : data is include in the clone file.
- not included : a pointer to the file is included but no data.
4. A default file name is given. To change this name, click Change (4). (image 5-46)
The file selection and location window opens. A default file name is already filled out (5).
5. Tip on the storage location at the left side (6a)
- Touch panel (
- USB Storage
Or,
tip on the drop down box and select the storage location (6b).
6. If you want to change the file name, tip on it, select the file name and enter a new name with the
keyboard.
7. Tip OK to accept the selected location and file name (7).
8. If you want to enter extra command, tip in the command field and enter the command with the keyboard
(9).
9. Tip Create clone file > (10).
The clone file is created and stored on the selected location.
164
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
To Next Page
Loading...
Need help?
General
