8. Macro editor
8.4.1.7 Activate LSC file
What can be done ?
The light sensor calibration file, which takes in account the image aspect ratio, can be installed in the
projector via the Activate LSC file command.
How to select a file
1. Tip on Activate LSC file.(image8-19)
The right pane shows the current selected file.
2. Tip on Select file.
A files overview window is displayed. (image 8-20)
3. Select the desired file out of the list and tip OK.
Or,
double tip on the desired file.
The selected file name appears next to Filename.
Image 8-19
Activate LSC file
Image 8-20
Select a LSC file
260 R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012