Barco DP2K Series User Manual

7. Touch panel
<lamp.currentLightOutput Read="50"/>
<lamp.modeSelection Read="50" ReadWrite="150"/>
<lamp.lightOutputCalibration Read="50" ReadWrite="150"/>
<lamp.CLOKey Read="50" ReadWrite="150"/>
<lamp.autoLampAlignment ReadWrite="100"/>
<lamp.advanced ReadWrite="150"/>
<lamp.lampSettings Read="50" ReadWrite="50"/>
<lamp.reset ReadWrite="50"/>
<colorcalibration.measureNativeColorGamut Read="50" ReadWrite="150"/>
<colorcalibration.selectTCGDFile ReadWrite="150"/>
<colorcalibration.verifyCorrectedColorGamut Read="50" ReadWrite="150"/>
<automation.GPIConfiguration Read="50" ReadWrite="100"/>
<automation.exceptionMacro Read="50" ReadWrite="100"/>
<advanced.SNMP Read="50" ReadWrite="150"/>
<advanced.internalCheck Read="50" ReadWrite="100"/>
<advanced.filemanager ReadWrite ="100"/>
<advanced.lens.parameters ReadWrite="150"/>
<advanced.functionality.key ReadWrite="150"/>
<!-- <filemanager.verifyCorrectedColorGamut Read="50" ReadWrite="100"/> Not availa
<keymanager.securityKeyManager Read="50" ReadWrite="50"/>
<keymanager.securityKeyManager.masterkey ReadWrite="150"/>
<certificate.retrieval ReadWrite="150"/>
<!--=====================================================================-->
<!-- Touchpanel related -->
<!--=====================================================================-->
<communication.touchpanelIpAddress Read="50" ReadWrite="100"/>
<communication.primaryProjectorIpAddress Read="50" ReadWrite="100"/>
<communication.secondaryProjectorIpAddress Read="50" ReadWrite="100"/>
<user.management Read="100"/>
<user.createUser ReadWrite="150"/>
<user.changeUser ReadWrite="100"/>
<user.deleteUser ReadWrite="150"/>
<display.navigationMenuPosition Read="50" ReadWrite="100"/>
<display.touchpanelBrightness Read="50" ReadWrite="100"/>
<display.touchpanelSound Read="50" ReadWrite="100"/>
<display.screensaver Read="50" ReadWrite="100"/>
<display.orientation Read="50" ReadWrite="100"/>
<display.color.palette Read="50" ReadWrite="100"/>
<display.calibrate Read="50" ReadWrite="100"/>
<display.icon ReadWrite="50"/>
<language.language Read="50" ReadWrite="100"/>
<diagnostics.versionInfo Read="50"/>
<diagnostics.touchpanelId Read="50"/>
<diagnostics.touchpanelLogfile Read="50"/>
<diagnostics.loglevel ReadWrite="100"/>
<systemclock.set Read="50" ReadWrite="150"/>
</UserAccess >
Example of custom access level file
<UserAccess>
<!--==================================-->
<!-- This is a user access file, to override definitions which -->
<!-- user type had access to which functionality. -->
<!--==================================-->
<!--==================================-->
<!-- This example file gives the "user type Default user" -->
<!-- additional access to -->
<!-- Screen masking -->
<!-- Input/Packing Selection -->
<!--==================================-->
<!--==================================-->
<!-- 50 = Default user access level -->
<!-- 100 = Theatre technician access level -->
<!-- 150 = Service technician access level -->
<!--==================================-->
<screen.masking ReadWrite="50"/>
<other.changeInputSelection ReadWrite="50"/>
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
227

Barco DP2K Series Specifications

General

Brand	Barco
Model	DP2K Series
Category	Touch Panel
Language	English