Barco DP2K Series - Page 230

7. Touch panel
<presets.lampControl Read="50" ReadWrite="50"/>
<presets.dowserControl Read="50" ReadWrite="50"/>
<presets.presetControl Read="50" ReadWrite="50"/>
<testpatterns.patternControl Read="50" ReadWrite="50"/>
<testpatterns.otherPatternControl Read="50" ReadWrite="50"/>
<service.lampControl Read="50" ReadWrite="50"/>
<server.connection.properties ReadWrite="150"/>
<!--=====================================================================-->
<!-- Configuration related -->
<!--=====================================================================-->
<presets.configuration Read="50" ReadWrite="100"/>
<macro.readActiveMacroFile Read="50"/>
<macro.activateMacroFile ReadWrite="50"/>
<macro.saveToMacroFile ReadWrite="100"/>
<macro.editMacroFile ReadWrite="100"/>
<image.readActivePcfFile Read ="50"/>
<image.activatePcfFile ReadWrite="50"/>
<image.changeActiveArea Read="50" ReadWrite="100"/>
<image.saveToMacroFile ReadWrite="100"/>
<image.save ReadWrite="100"/>
<screen.readActiveScreenFile Read ="50"/>
<screen.activateScreenFile ReadWrite="100"/>
<screen.anamorphicFactor Read="50" ReadWrite="100"/>
<screen.resizing Read="50" ReadWrite="100"/>
<screen.masking Read="50" ReadWrite="100"/>
<screen.saveToMacroFile ReadWrite="100"/>
<screen.save ReadWrite="100"/>
<lens.readActiveLensFile Read="50" ReadWrite="100"/>
<lens.activateLensFile ReadWrite="100"/>
<lens.control Read="50" ReadWrite="100"/>
<lens.anamorphic.control Read="50" ReadWrite="100"/>
<lens.saveToMacroFile ReadWrite="100"/>
<lens.save ReadWrite="100"/>
<other.readActiveExtraFile Read="50"/>
<other.activateExtraFile ReadWrite="50"/>
<other.changeInputSelection Read="50" ReadWrite="100"/>
<other.changeInputPacking Read="50" ReadWrite="100"/>
<other.changeProcessingPath Read="50" ReadWrite="100"/>
<other.editChange3DSettings ReadWrite="100"/>
<other.GPIConfiguration Read="50" ReadWrite="100"/>
<other.editAdvancedSourceSettings Read="50" ReadWrite="100"/>
<other.saveToMacroFile ReadWrite="100"/>
<other.save ReadWrite="100"/>
<!--=====================================================================-->
<!-- Diagnostics related -->
<!--=====================================================================-->
<actual.diagnostics Read="50"/>
<history.projector Read="50"/>
<history.security Read="50"/>
<tests.testPattern ReadWrite="100"/>
<tests.imageFreeze ReadWrite="100"/>
<tests.selfTests ReadWrite="100"/>
<tests.port292ErrorCounts Read="50" ReadWrite="100"/>
<tests.generalPurposeOutputs Read="50" ReadWrite="100"/>
<tests.reboot.projector Read="50" ReadWrite="100"/>
<tests.reboot.ti Read="50" ReadWrite="100"/>
<serversettings.graphicalOverview Read="50"/>
<serversettings.timelineControl Read="50" ReadWrite="100"/>
<serversettings.subtitleControl Read="50" ReadWrite="100"/>
<serversettings.metadataControl Read="50" ReadWrite="100"/>
<cinepro.setup Read="50"/>
<versioninfo.versionInfo Read="50"/>
<!--=====================================================================-->
<!-- Installation related -->
<!--=====================================================================-->
<communication.networkProperties Read="50" ReadWrite="100"/>
<communication.cineproProperties Read="50" ReadWrite="100"/>
226
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012