Canon ipf8300 - Printheads; Printhead; Checking for Nozzle Clogging

Printheads
Printhead ......................................................................................................................................................... 998
Checking for Nozzle Clogging ......................................................................................................................... 998
Cleaning the Printhead .................................................................................................................................... 999
Replacing the Printhead ................................................................................................................................ 1000
Printhead
• Printhead PF-05
Note
• For instructions on replacing the Printhead, see "Replacing the Printhead." →P.1000
Checking for Nozzle Clogging
If printing is faint or affected by banding in different colors, make sure the Printhead nozzles are clear by printing a test
pattern to check the nozzles.
Note
• Nozzles are periodically checked to ensure they are clear. Configure the settings on the Control Panel menu
in Nozzle Check. (See "Menu Settings.") →P.912
1. Load unused paper.
• Attaching the Roll Holder to Rolls →P.774
• Loading Rolls in the Printer →P.777
• Loading Sheets in the Printer →P.802
2. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).
Maintenance
> Printheads >
Printhead iPF8300
11
998
Downloaded from ManualsPrinter.com Manuals